A6 ownership guides · Service & repairsHot-tub photograph from A6’s installation gallery. Choose the service for the condition of your actual tub.
A6 ownership guides · Service & repairs
Get back to enjoying
your hot tub.
A thorough clean. Help with a fault. Or a fresh start after time away. Choose the A6 service for the job, and let the team take care of the work.
01 · Choose the visit
What would make your hot tub better today?
A full service freshens the tub and checks how it is working. A repair visit starts with a fault. Choose the route below and get help with the job you actually need.
A proper deep clean.
Platinum brings an 80-point health check, pipework flush and thorough clean together.
See Platinum service →A problem sorted.
Fault Finder starts with the cause, so you can make an informed decision about the repair.
See Fault Finder →A careful restart.
Hibernate or Re-Commission helps with closing down or bringing the tub back into use.
See shutdown & restart →02 · See what is included
The work behind a better soak.
Platinum Service & Clean
- Pipework biofilm flush
- Drain, shell clean and polish
- Cover, cabinet and steps cleaned
- Fresh refill and water balancing
- Electrical/control checks and operational test
Made for you ifYou want a full service, or need an unfamiliar or overdue tub assessed and cleaned.
What you getThe deep clean and checks are brought together in one quoted visit.
Worth knowingIf the checks uncover a repair, the team can explain the work and quote for it.
Fault Finder & Repairs
- Diagnostic inspection and fault report
- Filtration system checked
- Electrical/control-panel tests
- Water analysis and balancing
- On-site repair where possible
Made for you ifSomething has stopped working or is not behaving normally.
What you getThe visit focuses on finding the cause rather than guessing which part to buy.
Worth knowingYou get a diagnosis first, with any additional parts or work explained before you decide.
Hibernate or Re-Commission
- Clean and health check
- Hibernate: flush, drain and winter preparation
- Re-Commission: refill and bring back into use
- Cover, cabinet and steps cleaned
- Relevant water balancing/commissioning work
Made for you ifYou are leaving the tub unused or restarting one that has stood.
What you getThe work follows the shutdown or restart you actually need.
Worth knowingChoose Hibernate to close down, or Re-Commission to get a tub ready for use again.
03 · Know the difference
A water change does not reach every part of the system.
The shell is the part you can see. The pipework, pumps, filters and controls are part of the job as well.
Platinum brings a pipework flush, visible clean and operational checks into one visit. Fault Finder follows the problem, so you can understand the cause before choosing a repair.
Routine water testing and care still continue between professional visits. Keep following the owner’s manual and checking the water between visits.

What is being checked?
The parts you see. The system you do not.
The shell and cover: visible cleaning and condition checks.
The water circuit: the pipework and filtration that are part of the booked service.
The controls and electrical equipment: the tests and fault checks listed in the package.
You should leave the visit knowing what has been done, how the tub is working and whether anything needs attention.

04 · Planning for winter
Still using it, or putting it away?
If you plan to keep using the hot tub, discuss any faults and overdue care before colder weather makes a breakdown more inconvenient.
If you plan to stop using it, ask about Hibernate. Water can remain inside pipework after the shell has drained. Follow the model’s shutdown instructions and agree the service scope.
If the tub has stood unused, ask about Re-Commission before simply filling it and getting in. Tell the team how long it has stood and anything you know about its condition.

05 · Price and preparation
What will the visit cost?
Your quote is tailored to the tub, the job and your postcode. Call 0800 037 0803 or send the details below for the current price.
Tell us whether you want a one-off visit or help planning regular care. The quote will set out the visit and any separately priced work.
Describe the problem
Model, postcode, symptoms and error-code photograph.
Agree the scope
Choose the visit and confirm what the quote covers.
Prepare access
Keep panels reachable and follow the team’s instructions.
Keep the report
Understand what was done and what needs attention.
A closer look
Keep the care going between visits.


Before you decide
The questions worth asking.
How often should I book a hot tub service?
Follow the manufacturer’s instructions and the care your usage requires. A6 presents Platinum as a thorough periodic service. Heavy use and business settings need their own care arrangements. Professional visits do not replace routine water tests, cleaning and checks.
Do you only service tubs bought from A6?
A6’s service range covers hot tubs and swim spas of different makes, including units bought elsewhere. Give the model, age, symptoms and postcode when enquiring so the team can confirm the visit and any parts requirements.
Can a service fix cloudy water?
Share the test readings, water-care history and any other symptoms with the team. They can help identify the right next step. Wait until the water meets the required treatment parameters before bathing.
Should I drain it before you arrive?
Ask the team first. The engineer may need to see the fault or operating condition. Provide access to the panels and follow the preparation instructions given for your booked visit.
Will a fault be repaired on the first visit?
The team aims to repair on site where possible. If parts or another visit are needed, they can explain the work and quote for it before you decide.
Does the service guarantee my warranty?
Keep the service report with your ownership records and follow the care requirements in your model’s warranty. The team can discuss the booked work if you need help understanding the service record.
Can you arrange an ongoing maintenance package?
Discuss the model, usage and the tasks you want help with. A6 quotes these three visits individually. Ask the team to agree a schedule, price and repair scope if you want ongoing care.
Who will carry out the work?
A6’s Sharnbrook service team arranges the visit. The current service descriptions identify BISHTA-qualified engineering support, and A6’s WhatSpa? retailer profile lists BISHTA-certified engineers. Ask about the work and qualifications relevant to your particular installation.
Support from Sharnbrook
You do not need to have bought the tub from us.
Tell the team what you own and where it is. A6’s service pages cover different makes of hot tub and swim spa, with the visit and parts requirements agreed for the job.

Your next step
Tell us what needs a little attention.
A model-label photo, error-code photo and short description will make the first conversation much more useful. Add your postcode and whether the tub is currently filled and powered.
A6 Hot Tubs is listed as a 2026 WhatSpa? Approved Retailer. Water-care guidance also follows the owner’s manual and relevant BISHTA consumer guidance.






